Safety Warnings And Guidelines - Monoprice MP Voxel Pro User Manual

Fully enclosed 3d printer
Hide thumbs Also See for MP Voxel Pro:
Table of Contents

Advertisement

SAFETY WARNINGS AND GUIDELINES

Please read this entire manual before using this device, paying extra attention to these
safety warnings and guidelines. Please keep this manual in a safe place for future reference.
• This device is intended for indoor use only.
• Do not expose this device to water or moisture of any kind. Do not place drinks or
other containers with moisture on or near the device. If moisture does get in or on
the device, immediately remove it from its power source and allow it to fully dry
before reapplying power.
• Do not touch the device, the power cord, or any other connected cables with wet
hands.
• Do not install this device on an unstable surface where it could fall and cause either
personal injury or damage to the device and/or other equipment.
• Do not expose this device to excessive vibration or extreme force, shock, or
fluctuations in temperature or humidity.
• Do not expose this device to excessively high temperatures. Do not place it in, on,
or near a heat source, such as a fireplace, stove, radiator, etc. Do not leave it in
direct sunlight.
• Do not place or install this device in an area where it can be exposed to excessive
amounts of dust, humidity, oil, smoke, or combustible vapors.
• Use only in a well-ventilated area. Do not use in close, confined spaces.
• Prior to operation, check the unit and power cord for physical damage. Do not use if
physical damage has occurred.
• Before plugging the unit into a power outlet, ensure that the outlet provides the
same type and level of power required by the device.
• This device uses a grounded power cord and requires a ground connection for safe
operation. Ensure that the power source has a proper ground connection. Do not
modify the plug or use a "cheater" plug to bypass the ground connection.
• Unplug this device from the power source when not in use.
4

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

44091

Table of Contents