Monoprice MP Voxel Pro User Manual page 23

Camera: Displays the Camera Control screen, which allows you to turn the
camera on or off and display saved Photos and/or Videos.
Light: Turns the light on the extruder on or off.
FilamentDetect: Turns the filament check sensor on or off.
PrinterName: Allows you to change the name of the printer.
Buzzer: Turns the printer sounds on or off. The sounds include system
startup, screen selection click, etc.
FactoryReset: Resets all printer settings to their factory default values.
About: Displays information about the printer.
23