SAFETY WARNINGS AND GUIDELINES Be careful not to damage the PC paper on the build plate. Take care to avoid touching hot parts, including heat blocks, extruder nozzle, extruded filament, and the heated build plate. Do not wear gloves when operating or repairing to avoid entanglement. ...
INTRODUCTION Thank you for purchasing this 3D printer from Monoprice! This printer features a single extruder, which is capable of printing in PLA, ABS, and other materials. You can print from a Windows® or Mac® PC using a USB connection or can print from 3D model files stored on a memory card, without the need for a PC connection of any kind.
If you have any problem with your order, please give us an opportunity to make it right. You can contact a Monoprice Customer Service representative through the Live Chat link on our website www.monoprice.com or via email at support@monoprice.com.
INSTALLATION 1. Use the included 4mm hex wrench and 8x M4x6 screws (4x on each side), to attach the vertical part of the frame to the horizontal part of the frame.
2. Use the included 2.5mm hex wrench and 4x M5x20 screws to secure the vertical frame to the horizontal frame from the bottom. 3. Use the included 2.5mm hex wrench to loosen the screw marked with the red circle. Remove the screw rod, then re-tighten the screw. 4.
Page 10
4. Touch the Preheat button on the Main Menu. 5. Touch the Nozzle button, then set the temperature of the nozzle to your target value, which depends on the type of filament you are using. 6. Touch the Bed button, then the temperature to the target temperature for your filament type.
Page 11
10. While squeezing the lever on the Feed Mechanism, insert the filament and push it into opening. Keep pushing until you feel resistance as it hits the extruder. Release the lever on the Feed Mechanism. 11. Touch the button in the E column on the Move Menu to feed the filament into the extruder.
Page 12
15. After the first layer has been printed, touch the Pause or Cancel button to stop printing. 16. Compare the first layer with the images in the table below to determine whether the build platform needs to be leveled or not. If it does need adjustment, touch the AUTO LEVELING Cancel button, then perform the steps in the section.
AUTO LEVELING If the gap between the nozzle and the build platform is not correct, use the Auto Level function to adjust the gap. You will want to perform Auto Leveling before using the printer for the first time or after it is moved. Note that the Auto Level function will determine the local offsets for each location on a 5"x5"...
4. Once the gap is where you want it, touch the button to save the data and exit the menu. GLOBAL Z OFFSET LIVE LEVEL While printing is in progress, you can adjust the global Z offset. To do this, touch the Tune button on the print screen, then touch the CLOSE button to decrease the gap between the nozzle and the print bed or the FAR button to increase it.
8. Press the Connect to WiFi button on your mobile device. The connection will be completed within 10 ~ 60 seconds, the message MP10 is now connected to Wi-Fi will be displayed on your device's screen, and the IP address will be displayed at the top of the printer's LCD screen.
Page 16
2. Click the Next button on the Welcome screen, then click the I Agree button on the License Agreement screen. 3. Use the file browser to select an install directory or accept the default directory (recommended). Click the Next button to continue.
Page 17
4. Ensure that all boxes are checked, then click Install to continue. 5. Click Finish to complete the installation and launch the Cura program. 6. Click Printer > Printer > Add Printer...
Page 18
7. Click the Other option, then choose the Monoprice MP10 entry. Click the Add Printer button to continue. 8. The Machine Settings screen will be displayed. Click the Close button to finish the Cura installation.
Repetier-Host You can also install Repetier-Host from the file on the included microSD™ card. The screenshots below show the proper Repetier-Host settings to use for this printer.
TECHNICAL SUPPORT Monoprice is pleased to provide free, live, online technical support to assist you with any questions you may have about installation, setup, troubleshooting, or product recommendations. If you ever need assistance with your new product, please come online to talk to one of our friendly and knowledgeable Tech Support Associates.
Modifying the equipment without Monoprice’s authorization may result in the equipment no longer complying with FCC requirements for Class B digital devices. In that event, your right to use the equipment may be limited by FCC regulations, and you may be required to correct any interference to radio or television communications at your own expense.
EU Declaration of Conformity Monoprice, Inc. declares the product described within this user guide or manual is in compliance with below applicable directives. The full text of the EU Declaration of Conformity is available at the following internet address: https://www.monoprice.com/product?c_id=107&cp_id=10724&cs_id=1072403&p_id=34437...
For Consumers in the European Union: This EU Directive requires that the product bearing this symbol and or its packaging must not be disposed of with unsorted municipal waste. The symbol indicates that this product should be disposed of separately from regular household waste streams.
Page 24
Microsoft® and Windows® are registered trademarks of Microsoft Corporation in the United States and/or other countries. SD® and microSD® are trademarks or registered trademarks of SD-3C, LLC in the United States, other countries, or both. DuPont™ and Kapton® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company.
Need help?
Do you have a question about the MP10 and is the answer not in the manual?
Questions and answers