Monoprice MP Voxel Pro User Manual page 5

• Take care to prevent damage to the power cord. Do not allow it to become
crimped, pinched, walked on, or become tangled with other cords. Ensure that the
power cord does not present a tripping hazard.
• Never unplug the unit by pulling on the power cord. Always grasp the connector
head or adapter body.
• Ensure that the printer is turned off and unplugged from its power source before
making repairs or performing service.
• Ensure that the printer is turned off and unplugged from its power source before
replacing the fuse in the rocker switch power socket.
• Clean using a soft, dry cloth only. Do not use chemical cleaners, solvents, or
detergents. For stubborn deposits, moisten the cloth with warm water.
• This device is intended for use by persons 14 years of age or older. Adult supervision
is required.
• Take care to avoid touching hot parts, including heat blocks, extruder nozzle,
extruded filament, and the heated build plate.
• Do not wear gloves when operating or repairing to avoid entanglement.
• Do not reach inside the printer during operation.
• Always allow the printer and extruded filament to cool before reaching inside.
• Do not remove the wrapping around the nozzle.
5