Table of Contents
Advertisement
Sensor board
Removing the sensor board
Prerequisites
1. Follow the procedure in
2. Remove the
SIM
card.
3. Remove the
microSD
4. Remove the
base
cover.
5. Remove the
WLAN
card.
6. Remove the
WWAN
card.
7. Remove the
display
assembly.
8. Remove the
display
bezel.
9. Remove the
display
panel.
About this task
NOTE:
This procedure applies only to computers shipped with a sensor board.
The following images indicate the location of the sensor board and provide a visual representation of the removal procedure.
Steps
1. Open the latch and disconnect the LED cable from connector on the sensor board.
2. Gently lift the sensor board away from the display back cover.
Installing the sensor board
About this task
The following images indicate the location of the sensor board and provide a visual representation of the removal procedure.
Before working inside your
card.
computer.
Removing and installing components
87
Advertisement
Table of Contents
