Ojmar OCS SMART User Manual page 30

3. Home: Allows the user to return to the main menu.
4. My lockers: Shows the number of lockers in use by the user, up to a maximum of 3
free or 6 fixed.
If lockers have been in use, the identification number or numbers of the lockers in use
are displayed.
5. Permissions:
1. Active licence: For a user to have free and fixed locks at the same time, they must
have 2 licences (one for free and one for fixed). From this drop-down menu you
can select the licence you want.

NOTE: Only one licence can be active at a time.

EXAMPLE: A user has two licences. Selecting the free licence and tapping the
button causes the app to search for available free locks. Then, selecting the fixed
licence and tapping the
assigned to them.
2. User code: Allows the user to change their access code if they have closed the
lock using the app.

NOTE: The code must be 4, 5 or 6 digits long (depending on how the lock has
been configured (see Section 3.4.1)).

WARNING: IF THE LOCK HAS BEEN CLOSED USING THE APP AND THE CODE IS
CHANGED, THEY WILL NOT BE ABLE TO OPEN IT
3. Add licence: The user licence (which sets the number of lockers assigned, type of
lock, etc.) is generated by the facility staff. It is available as a QR Code or as a
compressed file.
Select the appropriate mode.
OCS SMART _ USER MANUAL _ VERSION 1.00
button causes the app to search for the fixed locks
AGAIN.
OJMAR 30