Mode Change (Free/Fixed); Configure Led Flashing When Closed; Configure Buzzer - Ojmar OCS SMART User Manual

4.4.2

MODE CHANGE (FREE/FIXED)

Fixed mode
In this mode the user must enter the same code each time they want to open or close the
lock.
The sequence to change from fixed mode to free mode is as follows:
By default the user code will be 0000.
The sequence to change to free mode using the keypad is as follows:
The sequence to change the user code is as follows:

NOTE: The code can be changed with the lock closed or open.
Free mode
In this mode the user can enter any code to close the lock.
The sequence to change to free mode is as follows:
4.4.3

CONFIGURE LED FLASHING WHEN CLOSED

The LED flashing when closed indicates that the locker is occupied.
The sequence to deactivate the LED when closed is as follows:
The sequence to activate the LED when closed is as follows:
4.4.4

CONFIGURE BUZZER

The lock buzzes each time a key is pressed.
The sequence to deactivate the buzzer is as follows:
The sequence to activate the buzzer is as follows:
2_OCS LOCK
"START" + MASTER CODE + 00 + LOCK
"START" + MASTER CODE + 01 + LOCK
"START" + MASTER CODE + NEW USER CODE + LOCK
"START" + MASTER CODE + 11 + LOCK
"START" + MASTER CODE + 95 + LOCK
"START" + MASTER CODE + 85 + LOCK
"START" + MASTER CODE + 25 + LOCK
"START" + MASTER CODE + 15 + LOCK
OJMAR 35