Page 1
ICW UL90 Installation Wall Mount Desk Mount Radius Mount Pole Mount...
Page 2
Using a level, mark the lower hole and drill pilot hole, insert the last #14 screw and, with the unit level, tighten both screws. Note: ICW supplies #14 wood screws, if installing into metal studs you will need to use proper metal stud fasteners.
Page 3
Attach your monitor to the ul90 using the 4mm screws in your hardware bag. Use the handles to adjust the tilt of your monitor. Thank you for your purchase of an ICW UL90 monitor mount. Any questions please contact ICW at: 1-800-558-4435...
Need help?
Do you have a question about the UL90 and is the answer not in the manual?
Questions and answers