Graco 24M510 Assembly, Installation And Operation Instructions page 29

9.0 in.
7.5 in.
(228.6 mm)
(190 mm)
3A2592A
4.75 in. (119.89 mm)
3.5 in (88.9 mm)
Mounting Templates
***NOTE***
Due to printer variations
the size of the template
MUST be verified for
accuracy prior to using.
To verify the template is
the correct size, using
the true to size template
provided on the last
pages of this manual,
measure the length of
the two intersecting lines
located in the center of
the diagram.
•
If each line mea-
sures 3.5" (88.9
mm), the template
printed true to size
and is safe to use.
•
If these lines do not
measure 3.5"
(88.9mm) use the
Mounting Dimen-
sion provided on
this page instead.
Prior to using this tem-
plate to drill holes, you
MUST verify the tem-
plate has printed true
size.
29