Graco 24M510 Assembly, Installation And Operation Instructions page 11

Ceiling Mounting Without an I-Beam - Open Channel
For SD10 Models order kit: 24A934, 24A935, 24A936, 24A937, 24A938, 24A939
For SD5 Models order kit: 24N674, 24N675
For SD5 Models mounted in an SD10 Model Mounting Channel: SD5 models require a specific hold down plate
designed for SD5 Cord Reels. Contact Graco Customer Service for assistance when ordering these parts.
NOTE: See page 16 for Open Channel dimensions.
FN Description
SCREW, 3/8" - 16 x
101
5/8"
102 WASHER, lock, 3/8"
103 BASE, reel, channel
104 PLATE, hold down
105 BASE, plate
1. Ceiling Mount Only: Position cord reel so the reel
base is facing up. Check pawl to make sure it is not
wedged (F . 4, 9). (Also see General Installation
IG
Information page 8.)
2. Use the base channel (F
position of the mounting holes before you drill.
3. Drill mounting holes.
4. Install the base channel (103) and base plate (105)
as shown in F . 8.
IG
105
F . 8
IG
5. Slide cord reel into the reel base (105) and install
the hold down plate (104), washer (102) and screw
(101). Tighten the screw firmly (F
secure before lowering the lift truck.
3A2592A
Open Channel Mounting Kits
SD 5 Models
24N674 24N675 24A934
1 Reels 2Reels 1 Reel
5 10 5
5 10 5
1 1 1
1 2 1
1 2 1
. 8 - 103) to lay out the
IG
103
104
102
101
. 8). Be sure it is
IG
SD 10 Models
24A935 24A936 24A937
2 Reels 3 Reels 4 Reels
10 15 20
10 15 20
1 1 1
2 3 4
2 3 4
6. Continue installation following steps 6 - 8 of
Wall/Ceiling Mounting with Plate instructions,
page 9.
Ceiling Mounting Directly to an I-Beam
1. Check pawl to make sure it is not wedged (F
9). (Also see General Installation Information page
8.)
2. Use the mounting template (F
position of the mounting holes before you drill
NOTE: Templates to scale are provided starting on
page 28.
3. Drill mounting holes in the I-Beam (C) (F
4. Bolt reel to I-Beam. Be sure it is secure before
lowering the lift truck.
A
F . 9
IG
5. Continue installation following steps 6 - 8 of
Wall/Ceiling Mounting with Plate instructions, page
9.
24A938 24A939
5 Reels 6 Reels
25 30
25 30
1 1
5 6
5 6
. 9 - B) to lay out the
IG
IG
B
Installation
. 4,
IG
. 9).
C
11