Installation Alternatives; Drive Module With Ip20 Shrouds (Option +B051); Drive Module With Full Cabling Panels (Option +H381); Input Power Cable Connection Terminals (Option +H370) And Ground Busbar Assembly - ABB ACS580-04 Hardware Manual

Installation alternatives

Drive module with IP20 shrouds (option +B051)

￭
For an installation example of the drive module with IP20 shrouds (option +B051) into
a Rittal VX25 enclosure including power cable connection procedure, see
example of drive module with IP20 shrouds (option

Drive module with full cabling panels (option +H381)

￭
For an installation example of the drive module with full cabling panels (option +H381)
into a Rittal VX25 enclosure including power cable connection procedure, see
Installation example with full cabling panels (option +H381) (page
Note: This installation alternative is not possible without pedestal (with option
+0H354).
Input power cable connection terminals (option +H370) and ground
￭
busbar assembly
Connect the input power cable connection terminals in the same way as the motor
cable connection terminals. Install the metallic shroud as shown below.
Combi screw M4×8
Torx T20 2 N·m
Mechanical installation 67
Installation
+B051).
121).
3AXD50000017460
10