Cmod-01 Multifunction Extension Module; Contents Of This Chapter; Product Overview - ABB ACS580-04 Hardware Manual

CMOD-01 multifunction extension module (external 24 V AC/DC and digital I/O) 267
25
CMOD-01 multifunction extension
module (external 24 V AC/DC and
digital I/O)

Contents of this chapter

This chapter describes how to install and start up the optional CMOD-01 multifunction
extension module. The chapter also contains diagnostics and technical data.

Product overview

The CMOD-01 multifunction extension module (external 24 V AC/DC and digital I/O)
expands the outputs of the drive control unit. It has two relay outputs and one
transistor output, which can operate as a digital or frequency output.
In addition, the extension module has an external power supply interface, which can
be used to power up the drive control unit in case the drive power supply is not on. If
you do not need the backup power supply, you do not have to connect it because the
module is powered from the drive control unit by default.
With CCU-24 control unit, a CMOD-01 module is not necessary for external 24 V AC/DC
supply connection. The external supply is connected directly to terminals 40 and 41
on the control unit.