Layout - ABB ACS580-04 Hardware Manual

136 Control unit

Layout

The layout of the external control connection terminals on the drive module control
unit is shown below.
X15
1...3
4...6
7...9
10...12
13...15
16...18
34...38
X12
AIR IN TEMP SLOT 2
FAN 2, FAN 1
SLOT 1
40, 41
19...21
22...24
25...27
TERM
BIAS
SLOT 1
Option slot 1 (fieldbus adapter modules)
ANALOG IN/OUT
1...3 Analog input 1
4...6 Analog input 2
7...9 Analog outputs
10...12 Auxiliary voltage output, digital
input common
DIGITAL IN
13...18 Digital inputs
EFB
STO
34...38 Safe torque off connection.
AIR IN TEMP Internal air temperature NTC
sensor connection
FAN2 Internal fan 2 connection
FAN1 Internal fan 1 connection
X12 Panel port (control panel connec-
tion, wired at the factory to the
control panel)
X15 Reserved to internal use.
EFB
EIA/RS-485 fieldbus connector
BIAS Bias resistor switch
TERM End termination switch
29...31 Connection terminals
SLOT 2
Option slot 2 (I/O extension modules)
40, 41 24 V AC/DC external power input
RO1 ... RO3
19...21 Relay output 1 (RO1)
22...24 Relay output 2 (RO2)
25...27 Relay output 3 (RO3)