GE Profile DPGT650GH Technical Service Manual page 11

7. Install the handle on the opposite side of the
door.
8. Remove the hinges from the door and install
them on the opposite side with the hinge pin
toward the outside of the door.
Rear of Door
Opposite Side
of Door
– 11 –
9. Insert the door on the opposite side of the
opening by moving the door in and down until
the top hinge and the bottom hinge are resting
on the top screws inserted in Step 3.
10. Remove the remaining screws from the side of
the opening from which the door was removed.
With these screws, secure each hinge at the
bottom.
11. Tighten the two top screws of each hinge.
Reinsert the plastic plugs on the side from which
the door was removed.