GE Profile DPGT650GH Technical Service Manual page 7

Time Dry
3
Use to set your own dry time. TIME DRY is also recommended for small loads.
To use TIME DRY:
1. Press the TIME DRY button until the amount of time you want is selected.
2. Select the temperature by pressing the TEMP button.
3. Close the door.
4. Press the START/PAUSE button.
Dry Level
4
The sensor continuously monitors the amount of moisture in the load. When the moisture in your
clothes reaches your selected dry level, the dryer will stop.
VERY DRY
MORE DRY
NORMAL
LESS DRY
DAMP DRY
TEMP
5
You can change the temperature of your dry cycle.
HIGH
For regular to heavy cottons.
MEDIUM HIGH
For regular cottons.
MEDIUM
For synthetics, blends and items labeled permanent press.
LOW
For delicates, synthetics and items labeled Tumble Dry Low.
EXTRA LOW
For lingerie and special-care fabrics.
My Cycles
6
Set up your favorite combination of settings and save them here for one touch recall.
These custom settings can be set while a cycle is in progress.
To store a MY CYCLES combination of settings:
1. Select your drying cycle.
2. Change TEMP and DRY LEVEL settings to fit your needs.
3. Select any drying OPTIONS you want.
4. Press and hold the
and the pad will light up.
To recall your stored MY CYCLES combination:
Press the MY CYCLES button before drying a load.
To change your stored MY CYCLES combination:
Follow steps 1–4 in "To store a MY CYCLES combination of settings".
START
7
Press to start a dry cycle. If the dryer is running, press it once and it will pause the dryer. Press it again
to restart the dryer cycle.
Use for heavy fabrics.
Use for heavy or mixed type of fabrics.
Use for normal dryness level suitable for most loads. This is the preferred cycle
for energy saving.
Use for lighter fabric (ideal for ironing).
For leaving items partially damp.
pad for three seconds to store your selection. A beep will sound
– 7 –