Table of Contents
Advertisement
3.4
Mounting type: Din-rail
UNO-127 supports WiFi modules. Follow the steps below for installation:
1.
Remove five screws from the back cover of UNO.
2.
Remove the plug of antenna pre-cut hole(s) on the top panel for antenna instal-
lation
3.
Install the SMA connector of Antenna cable onto the Antenna hole
4.
Connect the MHF of Antenna cable with the module
5.
Fix the washers and screw nut.
6.
Return the back cover and gently attach it into position
17
UNO-127 User Manual
Advertisement
Table of Contents
