Wireless Communication - SALUDA MEDICAL Evoke SCS User Manual

15.1.7 Evoke Accessory Belt
Table 15-8: Evoke Accessory Belt.
Materials Belt
Belt fastener
Pouch front
Pouch back
Pouch fastener
Dimensions Belt
Pouch
Storage Low: -10 °C (14 °F) High: 55 °C (131 °F)
Temperature
Limitations

15.2 Wireless Communication

15.2.1 Quality of Service & Wireless Coexistence
The Evoke SCS System employs a wireless communication link operating in the 402-405 MHz
MICS frequency band. This band is designated for implantable medical devices and enables
communication between the CLS/eCLS and the EPC.
At the beginning of each communication session, the EPC automatically scans 8 channels in the
frequency band and selects the least congested channel for communication. All communication
is error checked and is retried automatically. The user is notified if the wireless communication
link fails to connect.
The communication range between the EPC and the CLS/eCLS is typically 1 m (3.3 feet). If you
experience issues with the wireless communication between the EPC and CLS/eCLS, try the
following:
• Hold the EPC closer to the CLS/eCLS.
• Move away from other devices that may be causing interference (see Section 15.3).
• Do not operate other wireless devices, such as a mobile phone, tablet or laptop, at the
same time.
15.2.2 Wireless Security
The Evoke SCS System has a communication range of 1 m (3.3 feet). To enable the EPC to
communicate with an eCLS or CLS, it must first be paired with that stimulator. The EPC may
communicate with only one CLS or eCLS at a time. The stimulator will not respond to any
communication that does not come from a paired device. Additional mechanisms are in place
CLIN-UMAN-005176
Evoke® SCS System User Manual
Elasticized poly/cotton
Hook and loop fastener
Brushed poly/cotton
Perforated nylon
Hook and loop fastener
85 mm x 960 mm (3.3 in x 37.8 in) unstretched
140 mm x 270 mm (5.5 in x 10.6 in) unstretched
Revision: 4.01 Page 45 of 53