Epc Buttons And Indicators - SALUDA MEDICAL Evoke SCS User Manual

7.1 EPC buttons and indicators

EPC Lock/Unlock button
Stop button
Increase Therapy and Decrease Therapy buttons
CLIN-UMAN-005176
Evoke® SCS System User Manual
The 'EPC Lock/Unlock' button turns the EPC on and off.
Turn the EPC off to lock the buttons from being able to change
your therapy.
Turn the EPC on to unlock the buttons and see indicators. This
enables you to stop stimulation, change programs, turn
stimulation on, change therapy intensity, and check CLS and EPC
battery levels.
Note: When you turn the EPC on, all of the lights will flash briefly.
This is normal; you should only pay attention to the lights that
remain on.
Note: The EPC will turn off and lock automatically after 2
minutes; this does not cause the stimulator to turn off.
Press the 'Stop' button to stop therapy immediately.
After turning stimulation off, you can start therapy again by
pressing .
you can use the 'Stop' button.
You can increase your therapy, from off to a comfortable level,
using the 'Increase Therapy' button.
When you press the 'Increase Therapy' button to start
stimulation, it will ramp up to the last level it was set to (the level
indicated by the 'Therapy intensity' indicator light).
You can decrease your therapy using the 'Decrease Therapy'
button.
Caution: You must unlock the EPC before you can use
the 'Increase Therapy' and 'Decrease Therapy' buttons.
Revision: 4.01
Caution: You must unlock the EPC before
Page 23 of 53