SALUDA MEDICAL Evoke SCS User Manual page 24

Change Program button
Stimulator Battery Level indicator
CLIN-UMAN-005176
Evoke® SCS System User Manual
The 'Therapy Intensity' indicators will glow to reflect the level of
your current therapy settings.
You can change the level using the 'Increase Therapy' and
'Decrease Therapy' buttons.
The number of glowing bars may not change with every click of
the button, although the level of therapy will change.
When you have reached the maximum level for the current
program, all seven bars will be glowing. When therapy is off, only
one bar will glow and that bar indicates the level that you will
start at when you press the 'Increase Therapy' button.
Use the 'Change Program' button to switch between up to four
different therapy programs stored in your stimulator. One of the
'Selected Program' indicators will glow to show the program you
have selected.
1. Press the 'Change Program' button once and the
'Selected Program' indicator will start flashing.
2. Press the 'Change Program' button again until the desired
program is selected.
3. After 2 seconds, the 'Selected Program' indicator will stop
flashing, stimulation will turn off, and the stimulator will
change to the new program.
4. Start therapy again using the
Caution: You must unlock the EPC before you can use the
'Change Program' button.
The 'Stimulator Battery Level' indicator shows the battery level in
the stimulator, with three green bars indicating a full charge.
Revision: 4.01
Caution: When the orange bar
appears, the battery level is low and
should be recharged right away or
therapy may stop soon.
button
Page 24 of 53