Table of Contents
Advertisement
Settings
The Settings menu item opens a sub-menu populated with various commands for viewing
general status information on the Fisher Scientific unit and setting for the operation of the
incubator or its display window:
• Read access to error log
• Calibrating the incubator
• Toggling the temperature display unit between °C and °F
• Entering a configuration control code
Instructions for using these features are given in the following.
Error Log
Users calling customer service for support may be asked by the Fisher Scientific agent to
supply information from the error log of the incubator. It enables the user to browse through
the most recent 22 alarm messages that were caused by hardware or control loop errors. Each
error is displayed with an internal error code.
Error codes and instructions for clearing alarm conditions appear in the section
on
page
Table 7-9 Reading the Error Log
Fisher Scientific
12-1.
Press
to select the Settings icon and press
The word
error log has been selected.
Use the
numbered
After a few seconds, the display pane automatically switches
to the internal error code - for example,
E01 shows the latest fault, E22 shows the oldest fault.
to activate the menu bar, then use
appears in the display pane to indicate that the
Err
button to select the first entry in the error log,
(Error 01).
E01
Peltier Low Temp. Incubators
Handling and Control
Settings
"Error Codes"
or
to confirm.
.
109
7-9
Advertisement
Table of Contents
