Table of Contents
Advertisement
Installation procedures
Commissioning, general
Commissioning, general
Installing the Shelf Support Brackets
1. Insert the shelf support bracket [3] into the perforations [1] of the support rail and tilt it
downwards.
2. Make sure that the two vertical elements [2] of the shelf support bracket butt against the
support rail.
Figure 5-7 Shelf Support Bracket Installation
Installing the Perforated Shelves
[1]
[2]
[3]
[4]
Figure 5-8 Perforated Shelf
1. Push the shelf [4] onto the shelf support brackets with the tilt protection devices [2] facing
the rear panel of the low temperature incubator.
5-6
Peltier Low Temp. Incubators
Rear Pull-out Stop
Tilt Protection Device
Front Pull-out Stop
Shelf
Fisher Scientific
Advertisement
Table of Contents
