Turning The Controller Identify Led On And Off; Steps - NetApp StorageGRID 11.5 Hardware Installation And Maintenance Manual

Hardware Installation and Maintenance Guide for SG100 and SG1000 Appliances
Maintaining the appliance

Turning the controller identify LED on and off

The blue identify LED on the front and back of the controller can be turned on to help locate the
appliance in a data center.
Before you begin
You must have the BMC IP address of the controller you want to identify.

Steps

1. Access the controller BMC interface.
2. Select Server Identify.
3. Select ON and then select Perform Action.
Result
The blue identify LEDs light on the front (shown) and rear of the controller.
81