Vega WEIGHTRAC 31 Operating Instructions Manual page 18

Radiation-based sensor for mass flow detection

Hide thumbs Also See for WEIGHTRAC 31:

Table of Contents

4 Mounting

Fig. 7: Mounting the support stands

14 Screw M10 (24 pcs.) - provided by the customer

15 Washer M10 (24 pcs.) - provided by the customer

4. Tighten the screws (14) evenly with 45 Nm (33.2 lb ft).

Mounting - Sensor

1. Place two of the clamp collars (11) on the fastening brackets of

the support stands (6).

WEIGHTRAC 31 • 4 ... 20 mA/HART - four-wire

Table of Contents