Vega WEIGHTRAC 31 Operating Instructions Manual page 17

Radiation-based sensor for mass flow detection

Hide thumbs Also See for WEIGHTRAC 31:

Table of Contents

WEIGHTRAC 31 • 4 ... 20 mA/HART - four-wire

2. Drill the through-holes for the support stands (6) according to the

following drilling plan.

The through-holes in the support stands (6 in each) are suitable

for screws of size M10.

The screws (14) and the washers (15) for fastening on the con-

veyor belt are not included in the scope of delivery.

Fig. 6: Drilling plan for support stands

3. Use suitable washers (15) for mounting the support stands (6).

120 mm

(4.72")

15 mm

(0.59")

150 mm

(5.91")

4 Mounting

Table of Contents