Table of Contents
Advertisement
Unpacking
Open shipping container and check for shipping
damage. Report any damage immediately to
your distributor and shipping agent. Do not
discard any shipping material until the Edge
Bander is assembled and running properly.
Compare the contents of your container with the
following parts list to make sure all parts are
intact. Missing parts, if any, should be reported
to your distributor. Read the instruction manual
thoroughly for assembly, maintenance and
safety instructions.
Read and understand the entire contents of this manual before attempting set-up
or operation! Failure to comply may cause injury.
Contents of the Shipping Container
1
Edge Bander
1
Support Table
1
Stud
1
Hex Cap Screw, M8 x 100 (with hex nut)
2
Socket Head Cap Screws, M6 x 10
2
Flat Washers, M6
1
Hex Wrench, 5mm
1
Double Edge Trimmer
1
Owner's Manual
1
Warranty Card
7
Advertisement
Table of Contents
