Unscrewing The Control Panel; Installing The New Regulator Board; Installing The New Control Panel - Dentsply Sirona inFire HTC speed Service Manual

Dentsply Sirona
Service Manual inFire HTC speed
61 30 608 D3497
D3497.076.01.09.02 10.2018

Unscrewing the control panel

10.1.4.3
1. Unscrew the 4 nuts (M5.5) with a short socket wrench.
2. Remove all the plugs from the rear side of the control panel.
3. Remove the control panel (no longer required)
10.1.4.4

Installing the new regulator board

1. Insert the new regulator board supplied and screw it on tightly (6
TX10 screws).
2. Connect all the previously removed connectors, cable lugs, and
thermocouple cables to the new regulator board.
10.1.4.5

Installing the new control panel

1. Plug all of the connectors into the the rear side of the new control
panel.
2. Insert the new control panel and screw it down with the 4 nuts (M5.5).
10 Upgrading
10.1 Upgrading to Superspeed
43