Required Tools; Introduction - Dentsply Sirona inFire HTC speed Service Manual

Dentsply Sirona
Service Manual inFire HTC speed
61 30 608 D3497
D3497.076.01.09.02 10.2018
10.1.2

Required tools

● Screwdriver, Torx
20
● Screwdriver, Torx
10
● Electronic screwdriver (small, flat blade)
● Side cutting pliers
● Wrench insert 5.5
10.1.3

Introduction

These instructions describe the modification of an inFire HTC speed with
a new current control and a new control panel. To do this, the installed
parts are replaced by the parts supplied.
10.1 Upgrading to Superspeed
®
/ TX20
®
/ TX10
10 Upgrading
39