Resetting The Counter After Replacing The Heating Element; Replacing The Controller Board - Dentsply Sirona inFire HTC speed Service Manual

Hide thumbs Also See for inFire HTC speed:
Table of Contents

Advertisement

9 Replacing parts
9.2 Replacing the controller board
30
9.1.1

Resetting the counter after replacing the heating element

The heating element has been replaced.
1. Enter the code F8561.
From serial number 3000 or from converted electronics (Superspeed
upgrade kit) the service code is: F08561.
2. Press the S4 key in the display window for the operating hours.
 The entry cursor is at the beginning of the entry field for the
operating hours of the heating.
3. Enter the 0 five times.
4. Press the S1 key (next).
 The counter for the heating operating hours is now reset.
9.2

Replacing the controller board

Preparations
1. Switch the furnace on.
 Line 3 of the display shows the serial no. for 3 seconds (e.g.
"SERIAL NO"
2. Note the displayed
3. Enter the code F8561.
From serial number 3000 or from converted electronics (Superspeed
upgrade kit) the service code is: F08561.
 Line 1 of the display shows the operating time of the heating in
hours (e.g.
operating time of the storage battery in days (e.g.
BAT"
: 00096").
4. Note the displayed values and then switch the furnace off.
NOTICE
Data of the controller board can no longer be read because of a defect
If the data of the controller board can no longer be read because of a
defect, you can also refer to the type label at the back of the furnace for
the serial number.
Add the value 8760 for the operating hours of the heating system for
every year of operation.
Add the value 365 for the operating days of the storage battery for every
year of operation.
Activating new functions
Following a device upgrade and after replacing the controller board, some
programs may be blocked. In this case, customer service must generate
an activation code based on the device serial number. More detailed
information can be found in chapter "Upgrading [ → 38]".
Service Manual inFire HTC speed
: 1).
"SERIAL NO"
.
"HRS. HEATING"
: 00345) and line 2 indicates the
Dentsply Sirona
"DAYS STOR.
61 30 608 D3497
D3497.076.01.09.02 10.2018

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents