Table 4.1: Connections to TX26D01VM1CAA / PCM-9377
31
32
4.3 Installation of the SVGA Driver
Complete the following steps to install the SVGA driver. Follow the pro-
cedures in the flow chart that apply to the operating system that you are
using within your board.
Notes:
"D" throughout this chapter.
4.3.1 Installation chipset
NC
VSS
1. The windows illustrations in this chapter are intended
as examples only. Please follow the listed steps, and pay
attention to the instructions which appear on your screen.
2. For convenience, the CD-ROM drive is designated as
4
GND
49
Chapter 4