5.2
Installation of SVGA driver
Complete the following steps to install the SVGA driver. Follow the
procedures in the flow chart that apply to the operating system that
you are using within your PCM-5825 Series.
Important: The following windows illustrations are examples only.
Note 1:
Note 2:
Note 3:
You must follow the flow chart instructions and pay
attention to the instructions which then appear on
your screen.
The CD-ROM drive is designated as "D:" throughout
this chapter.
<Enter> means pressing the "Enter" key on the
keyboard.
When you are using a CRT display, please make
sure that your flat panel resolution settings (in the
BIOS setup) are the same as your VGA resolution
settings (in Windows). Otherwise your display may
behave strangely.
Chapter 5 SVGA Setup
4 9