Table of Contents
Advertisement
5 Preparation
5.1 Unpacking the product
1.
Carefully remove the product and accessories from the packaging.
2.
Check the delivery for missing items and evidence of shipping damage.
3.
In the case of damage, hidden defects, and short deliveries, document their nature and
extent and contact the manufacturer or supplier immediately.
4.
Keep packaging for further transport.
5.2 Testing the product
1.
Inspect the product for visible contamination. Do not use if contaminated.
2.
Inspect the product for the following characteristics:
–
Good working order
–
Functionality
–
Correct assembly of the components
–
Completeness
5.3 Assembling the product
ü The device is switched off and is not connected.
1.
Turn the standard adaptor of the device counterclockwise and remove it.
2.
Insert the product into the thread and turn it counterclockwise until it clicks into place.
3.
Screw in the product in a clockwise direction and tighten until hand-tight.
Instructions for use • Three-Way Adaptor for Light Source • BPZ174_EN_V1.0_02-2021_IFU_CE-MDR
Preparation
10
Advertisement
Table of Contents
