Expert Mode; Figure 6. Expert Mode User Interface - ST STM32F0 Series Application Note
Clock configuration too
Hide thumbs
Also See for STM32F0 Series:
- Programming manual (91 pages) ,
- Application note (52 pages) ,
- Application note (29 pages)
Table of Contents
Advertisement
Tutorials
3.2
Expert mode
This mode provides more flexibility regarding the configuration setup but the user must
ensure that the configuration is correct.
Figure 6.
Expert mode user interface
The 'View' button permits the .xls file to be viewed in full screen, to be activated or
deactivated.
The 'Reset' button permits the system clock to be reset to the default configuration.
These main steps are described in detail in this section:
1.
Configure the SYSCLK frequency.
2.
If required, enable the I2S clock and configure the I2S clock frequency.
3.
If required, configure the Prefetch buffer.
4.
Generate the system_stm32f0xx.c file.
5.
Add the system_stm32f0xx.c file to the working project to be built.
12/17
Doc ID 022837 Rev 1
AN4055
Advertisement
Table of Contents
Need help?
Do you have a question about the STM32F0 Series and is the answer not in the manual?
Questions and answers