Setting Up Synchronized Start Recording For External Digital Sources (Cd, Md, And Dat Only) - JVC XL-R5000BKB Instructions Manual

2
Turn the MULTI JOG on the main unit or press
the 4 and ¢ buttons on the remote control
until "CONVERTER" appears in the display.
3
Press the SET button.
• The current setting appears in the display. (The setting is ON by
default.)
• Press the CANCEL button if you do not wish to perform this
procedure.
4
Turn the MULTI JOG on the main unit or press
the 4 and ¢ buttons on the remote control
to select "ON" or "OFF".
• When the FS converter setting is set to "ON", the FS converter
is used for all recording regardless of the frequency of the
source.
• When the FS converter is set to "OFF", the FS converter is
bypassed during input of digital sampling frequencies of 44.1
kHz and during analog and multiple input recording. However,
when source sampling frequencies of 32 kHz or 48 kHz are
encountered, the FS converter is used regardless of the setting.
• Press the CANCEL button if you do not want to perform this
procedure. The setting is not changed.
5
Press the SET button.
Setting Up Synchronized Start
Recording for External Digital
Sources (CD, MD, and DAT only)
When performing digital synchronized start recording of an exter-
nally connected digital source, synchronized start recording begins
when a digital signal is encountered in the record pause mode.
However, it is also possible to set this unit to start and stop record-
ing when you are recording a single track.
XL - R5000 CD/CDR MULTIPLE COMPACT DISC RECORDER
STANDBY
POWER
CANCEL 3,5 1
CD REC SYNCHRO
CD EDIT FINALIZE
1 2
4 5
7 8
10 +10
PLAY MODE REPEAT
3,5
1
SHIFT
31
REC LEVEL
MIN MAX
MIX BALANCE PHONES LEVEL
MULTI JOG
– +
2,4
POWER
DISPLAY
MENU
1
CD 1
3
CD 2
6
CD 3
9
CONTROL
CD CDR
SET CANCEL
CANCEL
PITCH +
2,4
PITCH 0
REC
PITCH –
REC MUTING
REMOTE CONTROL
RM-SXLR5000J
1
When the unit is in stop mode, press the MENU
button (or the DISPLAY/MENU button on the
remote control while holding down the SHIFT
button).
2
Turn the MULTI JOG on the main unit or press
the 4 and ¢ buttons on the remote control
until "D-IN SYNCHRO" appears in the display.
3
Press the SET button.
• The current setting appears in the display.
4
Turn the MULTI JOG on the main unit or press
the 4 and ¢ buttons on the remote control
to select "START" or "START&STOP".
• When "START" is selected, only the start of the digital signal is
recorded synchronously.
• When "START&STOP" is selected, both the start and stop of
single track recroding are controlled by information in the
source digital signal.
• Press the CANCEL button if you do not want to perform this
procedure. The setting is not changed.
5
Press the SET button.
• Please note that the type of synchronized recording being per-
formed as set in the above procedure is not indicated in the dis-
play during actual recording. Even when recording is started,
only the "SYNCHRO" indicator remains lit until recording is
stopped.
• Even if this setting is set to "START&STOP", recording is con-
cluded automatically if the source is stopped, the disc is
changed, or if a track search is performed.