Listening To Cds; Continuous Playback Of The 3-Cd Changer (Playing The Loaded Discs Through Once Each) - JVC XL-R5000BKB Instructions Manual

Listening to CDs

Continuous Playback of the 3-
CD Changer (playing the loaded
discs through once each)
1, 2 3
XL - R5000 CD/CDR MULTIPLE COMPACT DISC RECORDER
STANDBY
POWER
7 8
3
Example: When starting playback at CD1.
1
Press the CD1 0 button to open the CD tray.
• The power comes on, and the CD1 tray opens.
2
Load a CD in position and close the tray.
Place the CD with its
label side facing up.
Place an 8-cm CD in the
center cutout.
• While referring to steps 1 and 2, press the CD2 0 button and
CD3 0 button, and load CDs in position on the CD2 and CD3
trays.
• While the tray concerned is being opened or closed or while the
CD selection is being changed internally, no operation will
result even if the 0 button is pressed.
• Disc trays cannot be opened if recording is being performed by
the CDR.
3
Press the CD1 button.
• The function is set to CD, and CD1 playback starts from track 1.
CD PLAYER 1 2 3 4 5
6 7 8 9
• The numbers of the tracks which have been played are cleared
from the music calendar.
• In this example, playback proceeds through all the tracks on
CD1, CD2, and CD3, and stops automatically after the last track
on CD3. This pattern changes depending on the first disc
selected as described in the following section.
11
REC LEVEL
MIN MAX
MIX BALANCE PHONES LEVEL
MULTI JOG
– +
DIGITAL HIGH SPEED AUTO TRACK
44.1 L
kHz
–
40 30 20 15 10 6 3 0 dB
R
When one or more CDs are already on the trays.
• Press the CD1, CD2 or CD3 button corresponding to the CD
concerned directly. Continuous play starts with the CD corre-
sponding to the number of the button pressed. If the button is
pressed when the power is in standby, continuous play starts
when the power is next turned on.
• When play starts from CD2
The CDs are played in the sequence of CD2 = CD3 = CD1,
after which play is automatically stopped.
• When play starts from CD3
The CDs are played in the sequence of CD3 = CD1= CD2,
after which play is automatically stopped.
If one of the trays does not contain a CD, play skips to the CD
in the next tray in the sequence.
Note
The CD1, CD2, and CD3 buttons do not function during program
and random play modes.
3
Playing CDs using the
Press the CD CONTROL 3 (play) button to select the 3-CD
changer function. This automatically starts playback of the disc in
the selected tray.
• The selected disc tray is indicated by the red "
the immediate right of the CD number displays.
Stopping CD playback
To stop playback at any time
• When the CD CONTROL 7 (STOP) button is pressed, play-
back stops and the total track number and play time appear in
the display.
• When all the tracks on a CD have been played through, play-
back will stop automatically.
To stop playback temporarily
• If the 8 (pause) button is pressed, playback is paused. When the
3 button is pressed, playback is resumed from the place where
it was paused.
• Pressing the 8 (pause) button during synchronized recording
has no effect.
• During mixed recording, recording continues even if the CD
CONTROL 8 (pause) or CD CONTROL 7 (STOP) button is
pressed.
button
" appearing to