Special Recording Edit Operations; Skipping A Recorded Track On A Cd-R Or Cd-Rw (Track Skip); Erasing A Track Or Tracks (Erase Function) - JVC XL-R5000BKB Instructions Manual

Special Recording Edit Operations

Skipping a Recorded Track on a
CD-R or CD-RW (Track Skip)
Occasionally, there may be tracks on a disc that are partial,
repeated, or are otherwise unwanted . Before a CD-R or CD-RW is
finalized, it is possible to put a skip marker for that track, which is
then recorded in the TOC information at must 21 tracks per disk.
When the disc is later finalized and played back, it will play back
as if the track had never been recorded.
XL - R5000 CD/CDR MULTIPLE COMPACT DISC RECORDER
STANDBY
POWER
3,5 1
CANCEL
CD REC
CD EDIT
10
PLAY MODE REPEAT
3,5
1
SHIFT
1
When the unit is in the stop mode, press the
MENU button on the main unit (or the DISPLAY/
MENU button on the remote control while
holding down the SHIFT button).
2
Turn the MULTI JOG dial or press the 4/¢
button on the remote control until "TRACK
SKIP" appears in the display.
3
Press the SET button.
• "SKIP (track number)?" appears in the display.
• Press the CANCEL button if you do not wish to perform this
procedure.
4
Turn the MULTI JOG dial or press the 4/¢
button on the remote control to select the track
number to be skipped.
5
Press the SET button.
• A skip marker is applied to the selected track, the PMA is
updated and "WRITE SKIP" is displayed . When complete, the
normal display is returned to.
• The track to be skipped is cleared from the music calendar.
27
REC LEVEL
MIN MAX
MIX BALANCE PHONES LEVEL
MULTI JOG
– +
2,4
POWER
SYNCHRO DISPLAY
FINALIZE MENU
1
CD 1
1 2
3
CD 2
4 5 6
CD 3
9
7 8
CONTROL
+10
CD CDR
SET CANCEL
CANCEL
PITCH +
2,4
PITCH 0
REC
PITCH –
REC MUTING
REMOTE CONTROL
RM-SXLR5000J
Notes
• Even if a track is skipped, the recorded information is not
erased and remaining time do not change.
• It is important to note, that while a skip marker can be
applied to a track, this procedure cannot be reversed.
• Tracks that have been assigned TRACK SKIP markers are only
skipped during playback on this unit and other compatible CD
players with TRACK SKIP function.
Erasing a track or tracks
(ERASE function)
XL - R5000 CD/CDR MULTIPLE COMPACT DISC RECORDER
STANDBY
POWER
4,6 2
CD REC SYNCHRO
CD EDIT FINALIZE
1
4
7
10 +10
PLAY MODE REPEAT
4,6
2
SHIFT
1
Load the unfinalized CD-RW to be edited, and
set the function to CDR.
• The number of tracks and play time are displayed.
2
When the unit is in the stop mode, press the
MENU button on the main unit (or the DISPLAY/
MENU button on the remote control while
holding down the SHIFT button).
3
Turn the MULTI JOG dial or press the 4/¢
button on the remote control until "TRACK
ERASE" appears in the display.
1
REC LEVEL
MIN MAX
MIX BALANCE PHONES LEVEL
MULTI JOG
– +
3,5
POWER
DISPLAY
MENU
2
CD 1
2 3
CD 2
5 6
CD 3
8 9
CONTROL
CD CDR
SET CANCEL
CANCEL
PITCH +
3,5
PITCH 0
REC
PITCH –
REC MUTING
REMOTE CONTROL
RM-SXLR5000J