Random Playback; Cd Playback Pitch Control; Disc Lock Function - JVC XL-R5000BKB Instructions Manual

Random Playback

The random play mode can be selected by pressing the PLAY
MODE button repeatedly on the main unit or remote control when
the function is in the CD stop mode.
XL - R5000 CD/CDR MULTIPLE COMPACT DISC RECORDER
STANDBY
POWER
PLAY MODE
10 +10
PLAY MODE REPEAT
PLAY MODE
SHIFT
• Random playback of tracks on the disc loaded in the CDR can-
not be performed.
• Random play is started by pressing the 3 button.
To release the random play mode
Press the PLAY MODE button in the stop mode repeatedly until
the RANDOM indicator is cleared from the display.

CD Playback Pitch Control

There are three CD pitch control buttons on the remote control that
can be used to vary the speed of CD playback up to 12% faster or
slower than the standard playback speed. This function can be use-
ful in changing the pitch when adding vocals to a recording using
the microphone input or when matching the playback speed of the
CD with another source.
To adjust the pitch of the source CD during
playback
While pressing down the SHIFT button, press PITCH+ to raise the
pitch or PITCH– to lower the pitch of CD playback. Each press of
the button raises or lowers the playback speed in 1% steps.
10 +10
CD
PLAY MODE REPEAT SET
PITCH +
PITCH+/PITCH–
PITCH 0
SHIFT
PITCH –
SHIFT
REMOTE CONTROL
RM-SXLR5000J
• To restore the playback speed to normal, press PITCH 0 while
pressing down the SHIFT button.
• The adjusted playback speed can only be recorded using analog
recording functions such as mixed recording.
• Even if the pitch has been adjusted, when digital synchronized
recording is performed, the pitch is automatically restored to 0
before recording begins.
15
REC LEVEL
MIN MAX
MIX BALANCE PHONES LEVEL
MULTI JOG
– +
CONTROL
CD CDR
SET CANCEL
PITCH +
PITCH 0
REC
PITCH –
REC MUTING
REMOTE CONTROL
RM-SXLR5000J
CONTROL
CDR
CANCEL
PITCH 0
REC
REC MUTING
• When the speed of CD playback is changed using the pitch con-
trol buttons, there is no output from the DIGITAL OUT OPTI-
CAL connector.

Disc Lock Function

The Disc Lock function can be used to make it impossible for chil-
dren or anyone else to take CDs out or load new ones for both 3 CD
changer and CDR.
This function is suitable for ensuring that timer play or timer
recording functions can be performed correctly.
• When the power is in standby, press the 0 button of CD1 while
holding down the 7 button on the front panel. "TRAY
LOCKED" appears for 3 seconds, and it is no longer possible to
take out or load CDs.
0
XL - R5000 CD/CDR MULTIPLE COMPACT DISC RECORDER
STANDBY
POWER
7
To cancel the Disc Lock function.
Repeat the same step. "TRAY UNLOCKED" appears for 3 sec-
onds, and the Disc Lock function is canceled.
Please note that the disc lock function is canceled if the main
power is turned off or if the AC power cord is unplugged from the
wall outlet.
REC LEVEL
MIN MAX
MIX BALANCE PHONES LEVEL
MULTI JOG
– +