JVC XL-R5000BKB Instructions Manual page 44

Message
CD-ROM DISC
DISC FULL
TNO FULL
CANNOT REC
NO REC SOURCE
UNLOCK
SCMS PROTECT
NOT AUDIO IN
NOT REC MUTE
SHORT REMAIN
CANNOT FIN
NO RW DISC
CANNOT ERASE
CANNOT UNFIN
DAO DISC
SKIP FULL
39
Significance
The inserted disc is a CD-ROM. Record
and erase functions are not possible.
The CD-R or CD-RW has no available
time.
99 tracks have been recorded on the disc.
Further recording is not possible.
Recording is not possible. This may be
caused by poor connections or disc trouble.
No recording source has been selected.
When performing digital recording of an
external component, the digital signal from
the component is not being sent or the sig-
nal being sent cannot be recorded by this
unit.
In accordance with SCMS regulations, digi-
tal recording cannot be performed.
The digital signal is not an audio format.
The REC MUTING button has been
pressed at a time when the function cannot
be performed.
Not enough time remains on the disc to con-
tinue synchronized recording from the 3-
CD changer to the CDR.
Trouble with the CD-RW has prevented
finalization from being performed.
A CD-RW has not been inserted. Erase and
unfinalize functions are not possible.
Trouble with the CD-RW has prevented an
erase function from being performed.
Trouble with the CD-RW has prevented the
unfinalize function from being performed.
The UNFINALIZE function cannot be per-
formed with discs recorded using the
"DISC at Once" recording system.
The maximum number of 21 tracks on the
disc that can be skipped has been reached.
Skip marking more than 21 tracks is not
possible with this unit.
Remedy
Replace with a disc recorded for audio for-
mat. (CD-DA)
Replace with another recordable CD-R or
CD-RW. Finalization of the disc is recom-
mended.
Finalize the disc. Replace the disc to per-
form further recording.
Check connections and/or replace the disc.
Select a recording source.
Check the connection between the compo-
nent and this unit and confirm that the digi-
tal signal being output from the component
is compatible with this unit.
Switch the source selection to select input
from the analog connections, and perform
analog recording.
Set the source component to output a digital
audio signal. For example, if a data track on
a CD is selected, switch to a track that con-
tains audio data.
See page 19 for information on when the
muting function can be used, and press the
REC MUTING button when the function
can be performed.
Replace the disc with a disc that contains
sufficient recording time.
Replace the disc
Replace the disc
Replace the disc