Direct Playback From A Specific Track; Forward And Reverse Search - JVC XL-R5000BKB Instructions Manual

• Pressing the CD 1, CD 2, or CD 3 buttons automatically sets the
main unit to the CD function and starts playback of the disc in
the selected tray.
• When the CD function is selected, the CD PLAYER indicator
lights in the display. When the CDR function is selected, the CD
RECORDER indicator lights.
2
Press the command button of the operation you
want to perform.
• The buttons on the remote control perform the same operation
as those on the main unit.
• The function is applied to the 3-CD changer or CDR function
depending on which function is currently selected.
Direct Playback from a Specific
Track
CD playback can be started from a specific track by pressing the
corresponding number button(s) on the remote control.
2
CD REC SYNCHRO
CD EDIT FINALIZE
1 2
4 5
7 8
10 +10
PLAY MODE REPEAT
PITCH +
PITCH 0
PITCH –
SHIFT
1
Press the function button corresponding to the
CD whose track is to be heard.
For a CD in the 3-CD changer
1
CD
2
CD
CD
3
CD
13
1
POWER
DISPLAY
MENU
CD 1
3
CD 2
6
CD 3
9
CONTROL
CD CDR
SET CANCEL
REC
REC MUTING
REMOTE CONTROL
RM-SXLR5000J
For a CD in the CDR
CDR
2
Press the number button(s) of the track you
want to hear.
The track number corresponding to the buttons pressed appears in
the display window, and direct play starts.
To select tracks 1 through 10
Press the number button 1 to 10 corresponding to the track.
To select tracks 11 or above
First press the +10 button, and then press one of the number but-
tons 1 to 10.
Example: Track 15
Press +10 followed by 5.
Example: Track 20
Press +10 followed by 10.
Example: Track 25
Press +10 twice followed by 5.
Another track can be selected even during play.
Press the number button(s) corresponding to the track which is to
be heard. The display now changes to indicate the corresponding
track number, and play starts from the beginning of the track con-
cerned.
To select a track of a CD on another tray, repeat the above proce-
dure.
• Direct play cannot be initiated by pressing the +10 button alone:
this button must be used with one of the number buttons 1 to 10.
Neither can direct play be initiated during program or random
play modes.

Forward and Reverse Search

The 1 (reverse) and ¡ (forward) buttons on the remote control
can be used to find a particular location on a CD. Press down the
button corresponding to the direction you want during CD play-
back. Release the button when the location you want to hear is
reached.
PLAY MODE REPEAT SET
PITCH +
PITCH 0
PITCH –
SHIFT
REMOTE CONTROL
RM-SXLR5000J
• During forward or reverse search, the playback will sound gar-
bled. However, normal playback will resume when the search
button is released.
Reverse
search
• If playback is paused when a search is performed, there is no
sound heard during the search. When the search is complete the
pause mode is resumed.
• When forward and reverse searching are performed during play-
back of the unfinalized disc, the display and/or the searching
function may not operate properly depending on the type of disc
that you are using.
CANCEL
1/¡
REC
REC MUTING
Forward
search