Synchronized Recording Of 3-Cd Changer Playback - JVC XL-R5000BKB Instructions Manual

To add track marks manually
1
In the procedure above, set the automatic track setting to
"AUTO TR OFF".
2
During recording, press the SET button to apply a track mark.
Notes
• Even if automatic track marking is turned off, automatic track
marking will be performed during synchronized one-button
recording. When this occurs, manual track marking is tempo-
rarily disabled.
• Tracks must be at least four seconds in length. Pressing the SET
button less than four seconds after the previous track mark cre-
ates a new track mark once 4 seconds of recording has been per-
fomed.
Synchronized Recording of 3-
CD Changer Playback
Performing synchronized one-button recording of
a full CD
XL - R5000 CD/CDR MULTIPLE COMPACT DISC RECORDER
STANDBY
POWER
1 3
One button synchronized recording of CDs loaded in the 3-CD
changer.
1
Select and stop the CD to be recorded.
Example: When recording CD1
• Only the selected CD is recorded.
2
Load a recordable CD-R or CD-RW and close
the tray.
3
Press the CD REC button to start recording.
• After "DISC DUBBING" is displayed, CD play and CDR/CD-
RW recording start simultaneously. This is called synchro
recording. Recording starts from the first track of the CD.
Remaining play time of
track being recorded
1 2 3 4 5
CD PLAYER
6 7 8 9 10
CD REC 1CD
• When a CD is recorded, its digital signals are recorded in their
original form. A track mark is automatically placed where one
track changes to the next, and the track number also changes.
1 2
REC LEVEL
MIN MAX
MIX BALANCE PHONES LEVEL
MULTI JOG
– +
Remaining recording time on
CD-R or CD-RW
SYNCHRO
HIGH SPEED AUTO TRACK
DIGITAL REC
CD-R
44.1 L
kHz
– 40 30 20 15 10 6 3 0 dB
R
When recording is complete
After "STOP DUBBING" is displayed, operation stops automati-
cally. It also stops automatically when CD play finishes.
To check a track number during recording
Press DISPLAY button on the main unit (or DISPLAY/MENU on
the remote control).
Main Unit
DISPLAY
CD number CD track number
To stop the recording at any time
Press the 7 (stop) button and "STOP DUBBING" flashes.
Notes
• There is no need to adjust the recording level (for a digital
recording).
• If the source CD being recorded from the 3-CD changer is itself
a digital copy, digital recording cannot be performed (see page
39 for more details.). When this occurs, the recording type will
switch automatically from digital to analog.
• This type of recording is not possible while a CD is playing.
• When the CD REC button is pressed, the function is automati-
cally switched to CD. This means that when the CD to be
recorded has been selected, recording can proceed straightaway.
• Upon completion of recording, "STOP DUBBING" flashes.
Always wait for "STOP DUBBING" to be cleared before pro-
ceeding with the next operation.
Performing synchronized one-button recording of
a single track
XL - R5000 CD/CDR MULTIPLE COMPACT DISC RECORDER
STANDBY
POWER
7
1 3
1
Select a disc and start playback.
Example: When planning to record a track on CD1
OR
Remote Control
DISPLAY
MENU
CD-R or CD-RW
track number
1 2
REC LEVEL
MIN MAX
MIX BALANCE PHONES LEVEL
MULTI JOG
– +
20