Power On/Standby Operations; Turning The Power On And Putting In Standby - JVC XL-R5000BKB Instructions Manual

Power ON/STANDBY Operations

Turning the power on and
putting in standby
0
CD1, CD2, CD3
XL - R5000 CD/CDR MULTIPLE COMPACT DISC RECORDER
STANDBY
POWER
3
POWER
( )
POWER
CD REC SYNCHRO DISPLAY
CD EDIT FINALIZE MENU
CD 1
1 2 3
CD 2
4 5 6
CD 3
7 8 9
CONTROL
10 +10
CD CDR
PLAY MODE REPEAT SET CANCEL
PITCH +
PITCH 0
REC
PITCH –
SHIFT REC MUTING
REMOTE CONTROL
RM-SXLR5000J
To turn on the power
Press the POWER (for Canada and U.S.A.)/
tries) button on the front panel or remote control.
Main Unit
Remote Control
Lamp goes out.
POWER
STANDBY
POWER
For Canada and U.S.A.
• The currently selected function appears in the display window.
To put the power to standby
Press the POWER (for Canada and U.S.A.)/
tries) button on the front panel or remote control.
Main Unit
Remote Control
Lamp lights
POWER
STANDBY
POWER
For Canada and U.S.A.
0
REC LEVEL
MIN MAX
MIX BALANCE PHONES LEVEL
MULTI JOG
– +
3
POWER ( )
CD1, CD2, CD3
3
(for other coun-
Main Unit
Remote Control
Lamp goes out.
STANDBY
STANDBY/ON
For other countries.
(for other coun-
Main Unit
Remote Control
Lamp lights
STANDBY
STANDBY/ON
For other countries.
• The clock display appears in the display window. It flashes if
the clock has not been set.
• The power can only be put to standby by pressing the POWER
(for Canada and U.S.A.)/
ing.
If the POWER (for Canada and U.S.A.)/
button is pressed during recording, the standby lamp flashes while
the unit brings the operation to a stop. Once the unit has been put in
the stop mode, the unit is put in standby and the standby lamp
lights steady. During this time, there is no effect if any of the but-
tons on the front panel or remote control (including POWER (for
Canada and U.S.A.)/ (for other countries)) are pressed.
To turn on the power by pressing a function button
When the power is switched to STANDBY, it can be turned on and
a function selected simply by pressing one of the buttons shown in
the figure below
Function
Main unit
Remote control
CD
1
CD
2
CD
3
CD
Main unit
(CD control)
CD
Main unit
(CDR control)
CDR
• When the 3 button for either the 3-CD changer or CDR is
pressed, the power is turned on and the corresponding tray is
selected. If a disc is loaded in the selected tray, playback begins.
If the power has been turned on, pressing 3 on the remote con-
trol selects the last selected function (3-CD changer or CDR)
and starts playback of the disc loaded in the selected tray.
• When one of the 3-CD changer 0 (eject) buttons or the CDR
EJECT 0 button is pressed, the power is turned on and the tray
opens, but the currently selected function (3-CD changer or
CDR) does not change.
• If the main power is turned off or if the AC power cord is
unplugged from the wall outlet for longer than an hour, the
internal clock, program etc. of this unit may be reset. When this
occurs, please set the clock (and timer functions) again.
(for other countries) button press-
(for other countries)
Operation
The function is set to CD. The
CD PLAYER indiator lights.
If one of these buttons is
pressed when a CD is on the
corresponding CD tray, con-
tinuous play starts from the
CD tray which corresponds to
the button pressed.
These buttons do not function
during program and random
play modes.
The function is set to CD. The
CD PLAYER indicator lights.
The function is set to CDR.
The CD RECORDER indica-
tor lights.
10