Table of Contents
Advertisement
2.
SPECIFICATION
2.1
INTENT OF USE
The pump unit may only be used in accordance with the operating instructions for Stanley Engineered Fastening placing tools
and for placing Stanley Engineered Fastening rivets.
The pump unit is an electrically driven, hydraulic power source. When coupled to a compatible Stanley Engineered Fastening
placing tool and the relevant nose assembly is attached, it can then be used to install a range of Avbolt
®
®
Avdelok
XT and Neobolt
fasteners in industrial environments.
The tool is fitted with two Hydraulic Hoses and an electrical Control Cable, 0.6m in length. Additional hydraulic hose and
cable extension lengths are available to order separately as required. Refer to the table below for the available hose assembly
lengths and associated part numbers.
The safety instructions must be followed at all times.
HYDRAULIC HOSE ASSEMBLY
PART NUMBER
07008-00448
07008-00449
07008-00450
®
HOSE LENGTH
5 Metre
10 Metre
15 Metre
®
®
, Avdelok
, Avseal
II,
7
Advertisement
Table of Contents
