Table of Contents
Advertisement
Mounting the camera via
electrical box
Mount the base to an electrical box.
1.
Remove the camera unit from the base
(A Pg. 17)
2.
Mount the base to the electrical box
Use two mounting holes and two M4 screws to
mount the base to the electrical box.
Memo ：
● M4 screws are not supplied.
4 inch square electrical box
M4 screw (not supplied)
3.
The following procedures are the same as
normal mounting
● Cable connection (A Pg. 18)
● Mounting the camera to the base
(A Pg. 19)
● Image adjustment (A Pg. 28)
● Mounting the inner dome (A Pg. 30)
● Mounting the dome cover (A Pg. 30)
21
Advertisement
Table of Contents
