Setup
Procedures
The connection and setup procedures are
described as below.
Make sure you touch the metal surface of
the [MONITOR] terminal to release the
static electricity from your body. Static
electricity may cause the camera to
malfunction.
Make sure that various parts of the camera
do not drop on the floor when mounting the
base to the ceiling or connecting the cable
of the camera unit.
When mounting the heater (sold separately
: KA-ZH215), read the instruction manual of
the heater carefully before mounting.
16
Setup (A Pg. 16)
Mount the camera and configure
step 1
image settings.
K
Network Settings
(A Pg. 32)
step 2
Configure the network settings of
the computer and this camera.
K
Internet Explorer Settings
(A Pg. 39)
step 3
Configure the picture quality and
alarm settings using the Internet
Explorer.
K
Operation of Built-in Viewer
(A Pg. 72)
step 4
Monitoring and still image saving
operations are possible using the
built-in viewer.