Table of Contents
Advertisement
A
Destination
Address
Access
Restrictions
IP Address
Note ：
● Note that when allow is selected and all IP
address fields are left blank, JPEG
acquisition by all IP addresses will be denied.
However, restrictions are not imposed on
access to the Web Setting page.
In addition, VN-C215VP4U will also deny
access when instructions for JPEG
transmission to the specified IP address are
sent via API.
Restrictions may be imposed on clients accessing VN-C215VP4U using the
IP address.
When deny is selected, acquisition of JPEG via the IP address specified
for the [IP Address] item will be denied. However, restrictions are not
imposed on access to the Web Setting page.
When allow is selected, acquisition of JPEG via the IP address specified
for the [IP Address] item will be permitted. However, restrictions are not
imposed on access to the Web Setting page.
When a multicast address is specified and deny is selected, VN-
C215VP4U will deny transmission to this multicast address.
When a multicast address is specified and allow is selected, VN-
C215VP4U will only allow transmission to this multicast address and deny
transmission to multicast addresses that are not stated in the [IP Address]
field.
Memo ：
● To specify a specific IP address range, enter
a combination of the IP address and subnet
mask in the [IP Address] field.
● Define the subnet mask using a bit length
between 8 and 30.
For example, a range between 192.168.0.0
and 192.168.0.255 is specified as
192.168.0.0/24 ([IP address]/[bit length of
subnet mask]).
61
Advertisement
Table of Contents
