Table of Contents
Advertisement
Details Page
This page is for performing detailed network setting.
This page can be used during access using admin .
● Press the [OK] button to enable the new settings upon changing.
● If the [OK] button is pressed upon entering an invalid value, a warning message will appear and the
entry will be denied. Press the [Cancel] button to restore the invalid entry to the current value.
A
TOS(DS field)
B
TTL Unicast
C
TTL Multicast
D
MTU
E
Negotiation
For setting the TOS value of IP packets in which JPEG is stored.
The upper 6 bits out of 8 bits in TOS value belong to DSCP.
This upper 6 bits can be set. The lower 2 bits are 0 . For example, when
255 is entered, the lower 2 bits are converted to 0 , so 255 is set.
TOS values are used in networks that support priority control. By setting
priority control to the network switch, routing can be done using packet with
bigger TOS value as first priority.
For setting the TTL value of JPEG packets that are to be sent via TCP.
For setting the TTL value of JPEG packets that are to be sent via multicast.
For setting the maximum packet size for storing JPEG.
[Setting range: 1280 to 1500]
For setting the negotiation of the network.
When a value other than Auto is selected, do not set the network device to
be connected to Auto . Ensure that it is set to the same value as VN-
C215VP4U.
A
B
C
D
E
57
Advertisement
Table of Contents
