When Installing The Camera Using The Conduit Hole (Side); When Installing The Camera Using The Electrical Box - JVC Dome Camera TK-C205VP Instructions Manual

Installation and connection

When Installing the Camera Using the Conduit Hole (side)

When installation cannot be made to the ceiling, use the conduit hole on the main unit side to
install to the pipe.
2.
Set screw
Conduit
plug
3.
4.
E-16
1.
Follow steps 1 - 5 of Mounting the Base
to the Ceiling.
( page 10 & 11)
2.
Loosen the set screws (M3 × 6mm) with
a flat-head screwdriver and remove the
plug on the main unit side.
3.
Insert the removed plug into the conduit
hole on the bottom of the camera.
4.
Screw in the pipe into the conduit hole
on the main unit side.
CAUTION
When installing the pipe to the conduit
hole (side), do not screw in the thread
portion of the pipe more than 12mm
( 15 / "). Screwing in the pipe into the base
32
more than required may damage the base
interior.
5.
Steps hereafter are the same as when
installing the dome camera to the
ceiling.
( page 12 - 15)

When Installing the Camera Using the Electrical Box

When installation cannot be made using the conduit holes, install the camera to the electrical
box.
4 Inch square electrical box
Mounting
holes
1.
Follow steps 1 - 3 of Mounting the Base
to the Ceiling.
( page 10 & 11)
2.
Use the 2 mounting holes to fix the box
to the base.
CAUTION
Use M4 screws or bolts for attaching to
the ceiling. (M4 screws and bolts not in-
cluded.)
3.
Steps hereafter are the same as when
installing the dome camera to the ceiling.
( page 12 - 15)
E-17