When Mounting The Camera To The Electrical Box; Mount By Allowing The Cable To Exit From; The Side; Adjusting Image Adjusting Images - JVC TK-C210FW Instructions Manual

Installation and connection (continued)
Mounting the Camera to the
Ceiling (continued)
When mounting the camera to the
electrical box
NOTE:
Before mounting the camera to electrical boxes,
please consult your nearby JVC authorized
dealer for details on the type of electrical box for
which mounting is possible.
Connecting
1.
Align j with the shooting direction when
mounting the cover to the electrical box.
Adaptor ring
Align with shooting direction
2.
Follow steps 2 to 7 of When mounting the
camera directly to the ceiling or on the wall
( Connecting) (A pg. 20).
Mounting
1.
Attach the camera to the outer case that
has been fastened to the electrical box.
Follow steps 1 to 3 of When mounting the
camera directly to the ceiling or on the wall
( Mounting) (A pg. 21)
Adjusting Images
After mounting is completed, adjust the
images while checking the actual image.
(A pg. 23 Adjusting Images )
22

Mount by allowing the cable to exit from

the side

When mounting the camera to the ceiling or a
wall, it is possible to guide the cable from the side
without opening any holes.
The basic mounting method is identical to steps
in When mounting the camera directly to the
ceiling or on the wall (A pg. 20).
1.
Break the cable extraction hole using a
pair of long-nose pliers
2.
Pull out the cable from the extraction hole
and mount it to the ceiling or wall
3.
Connecting the cable
Follow steps 4 to 7 of When mounting the
camera directly to the ceiling or on the wall
( Connecting) (A pg. 21)
Cable
4.
Adjusting Images
After mounting is completed, adjust the
images while checking the actual image.
(A pg. 23 Adjusting Images )
Adjusting Image
Adjusting Images
Upon mounting the camera, adjust the images
while checking the actual image.

Mounting the test monitor

Connect the [MONITOR] terminal of this camera
to a test monitor to adjust the camera's shooting
direction, image and focus.
* The power to the camera body must be ON
when adjustments are performed.
[MONITOR]
Terminal
Test Monitor
*TK-C215V4 is used in the above illustration
CAUTION:
The TK-C210FW monitor produces a high
impedance output. Do not terminate the test
monitor. Allow it to remain open during
connection. When a test monitor that cannot be
left open is connected to this terminal, the picture
level when connected to the video signal output
connector may deteriorate and appear dark.
However, this is not a malfunction.
TK-C215V4/V12 output at an impedance of 75 K.

Adjusting the camera direction

The camera unit can be adjusted horizontally or
vertically and rotated. Adjust the camera in the
direction of the object.
CAUTION:
● Please discharge a static electricity by
touching to a [MONITOR] Terminal by hand
before adjust the angle of view.
● Before adjusting the shooting direction of the
camera, ensure that the pan fastening screw
is loosened. Moving the lens unit without
loosening the pan fastening screw may
damage the lens unit.
Pan : ± 175
Rotation : ± 175
Tilt : ± 80
*TK-C215V4 is used in the above illustration
Camera's shooting
direction mark
Pan center mark
Rotation center mark
UP
OFF ON
1 AGC
2 CABLE SHORT MID LONG Pan fastening screw
FOR S E R VIC E
3 LENGTH
4 WHT. BAL. ATW AWB
WB : Be sure to loosen the
ET
screw before adjusting.
O
N
Rotation knob
4
: Always adjust the
rotation by holding this
knob.
OFF ON
5 BLC
OFF ON
6 DAY/NIGHT
FOCUS ADJUST
7 SHUTTER 1 /60 1 /100
8 R ESEVED SET TO OFF
SEE INSTRUCTION MANUAL
NOTE:
● Pan rotation of ±175 is possible from each of
the camera's shooting direction mark, pan
center mark and rotation center mark. When
adjusting the rotation, do not hold the lens unit.
Always adjust by holding the rotation knob.
● When using the camera at locations with strong
vibration, stabilize by tightening the tile
fastening screw and pan fastening screw to
prevent distortion of the camera's field angle.
CAUTION:
● Moving the camera beyond its adjustable range
may cause failure in maintaining the
performance of this camera.
● As this camera has a wide tilt/rotation range, a
part of this camera may appear on the screen
depending on the field angle and orientation.
● Do not hold the lens unit when adjusting the
direction of the camera. Applying force on the
lens unit may damage it.
23