Mounting The Camera Using The Electrical Box - JVC TK-C215VP12 Instructions Manual

Note:
● Make sure that the dome cover is firmly
fastened.
Otherwise, the humidity level may rise, which
may result in fogging and even falling of the
cover.
● Ensure that the fall prevention wire of the
dome cover is not caught in the space
between the dome cover and base. Failing to
do so may cause the dust-proof and water-
proof features to malfunction.
Mounting the camera using
the electrical box
Mounting the base to the electrical box.
1.
Setting the switches (A Pg. 17)
2.
Removing the camera unit from the base
(A Pg. 17)
3.
Mounting the base to the electrical box
Mount the base to the electrical box by using the
2 mounting holes and 2 M4 screws.
Memo:
● M4 screws are not supplied with this product.
4 Inch square electrical box
M4 Screw
4.
The following procedures are same as
normal mounting
● Cable Connection (A Pg. 19)
● Mounting the camera unit to the base
● (A Pg. 20)
● Adjusting Images (A Pg. 22)
● Mounting the inner dome (A Pg. 24)
● Mounting the dome cover (A Pg. 24)
Base
25