SANY SY500H Operation And Maintenance Manual page 58

MACHINE CONTROLS
1
9
8 7
F1 F2
Figure 3-47
NOTE: The Main Menu screen displays icons for the
various options that can be accessed via the
function icons and function buttons at the bottom
of the screen. Each icon is highlighted when
selected.
1. Press function button F5 (6) on the Home screen to
access this screen.
• Work Parameters (1) (password required) – displays
running parameters of the engine and hydraulic
system. See "Password Screen" on page 3-29.
• Maintenance Information (2) – viewable only when
maintenance is required. See "Maintenance
Information Screen" on page 3-29.
2
5
6
F3 F4 F5
0004957,0004714
• Error Codes (3) – displays specific codes if a fault
condition occurs. See "Error Codes Screen" on
page 3-31.
• System Setting (9) – allows for language, units of
measure, time, and date selection. See "System
Setting Menu Screen" on page 3-32.
• Machine Configuration (5) (for factory use only).
3
• Global Positioning System (GPS) Information (4) –
displays location, velocity, and time.
2. Press function button F1 (8) to navigate to the
desired icon.
3. Press function button F3 (7) to confirm your selection
and proceed to the next screen.
4
4. Press function button F5 (6) to return to the Home
screen without selecting any icon.
NOTE: Function button F4 is for use only by SANY
technicians.
3-28 SY500H Excavator OMM