SANY SY500H Operation And Maintenance Manual page 105

Figure 4-71
NOTE: If work equipment is attached to the machine, the
equipment should be positioned in front of the
machine during loading.
Figure 4-72
NOTE: If no work equipment is attached, reverse the
machine onto the trailer.
Figure 4-73
NOTE: The machine may lean forward when it passes
over the trailer wheels.
6. Move the machine slowly until the tracks have full
contact with the trailer.
7. Raise the work equipment slowly and high enough to
avoid hitting the trailer or truck.
Figure 4-74
SY500H Excavator OMM
8. Swing the machine so the work equipment faces the
back of the trailer.
3
0000723
9. Place a support block (3) on the trailer under the
work equipment.
10. Fully extend the bucket cylinder arm and arm
cylinder.
11. Lower the work equipment onto the support block.
12. Shut down the machine and remove the key from the
key switch.
0000724
13. Close and lock the windows.
14. Exit the cab.
0000725
NOTE: One outside mirror (4) is attached to the right side
of the upper structure. The other mirror (5) is
mounted to the cab.
15. Turn both of the outside mirrors inward so they are
within the perimeter of the machine.
16. Turn the battery disconnect switch to OFF.
0000726
4-35
MACHINE OPERATION
Figure 4-75
4
Figure 4-76
0000727
5
0000631